Times are displayed in (UTC-08:00) Pacific Time (US & Canada) Change
Wednesday, 12:00 PM - 2:30 PM
Poster Session
Session Chairs:
Presentations
Note: Presentations may start a few minutes before the time listed in the schedule.
| Participant Role | Details | Action |
|---|---|---|
| Submission | Investigation of the Stack Effect on the Impact of the Outdoor Air Quality on the Indoor Environment | View |
| Submission | Joint Radiation and Recombination in Nanoporous Thin Film Solar Cells Using Physics Informed Deep Learning Approach Abstract. | View |
| Submission | A Representative Elementary Volume Study: The Mechanical Effect of the Inclusion of Carbon Nanotube on Zinc-Silver Oxide. | View |
| Submission | Multi-Scale Modeling and Experimental Analysis of 0.8 Wt% Y2o3-Strengthened Ss316l Ods Alloys Fabricated via Lpbf | View |
| Submission | Design and Fabrication of Silicone-Based Bioscaffolds Using Additive Manufacturing | View |
| Submission | Analytical Study on the Thermal Performance Characteristics of Fuel Cell Cooling Systems Combined With Heat Pump Technology | View |
| Submission | Thermal Conductivity of Perovskite and Post Perovskite Mgsio3 Using Machine Learning Interatomic Potential | View |
| Submission | From Buckyball C60 to Amorphous Carbon Structure Through Atomistic Modeling | View |
| Submission | C60 Embedded Sioc Electrospun Fibermat as a High-Capacity Electrode Material in Li-Ion Batteries. | View |
| Submission | Contactless and Reversible Electrowetting by Controlled Charge Deposition | View |
| Submission | Carrier Controllability in Two-Dimensional Transition Metal Dichalcogenides | View |
| Submission | Structural Health Monitoring of Wind Turbine Blades Utilizing Guided Waves | View |
| Submission | Thermal Analysis of Capacitive Charging Pads for Electrified Roadways | View |
| Submission | Small Punch Test-Based Fatigue Damage Assessment | View |
| Submission | Developing Novel Coherence Measures for Systems With Multiple Correlated Inputs: Theory and Application to the Study of Pathological Tremor | View |
| Submission | The Acorn Model in an Online Environment | View |
| Submission | Promoting Creative Critical Thinking in an Online Environment | View |
| Submission | 3d Phase-Field Modeling of Aluminum Foam | View |
| Submission | The Effect of Tension on the Mass Losses and Moduli Degradation of Biomed and Surgical Guide Resin Made by 3d Stereolithography and Buried Into Potting Soil | View |
| Submission | Convolution Finite Element Level Set Method: Application to Additive Manufacturing Simulations | View |
| Submission | Design and Fabrication of Bone-Like Composite Tissue Scaffolds Using Nuclear Pasta Design Theory | View |
| Submission | A Convolutional Neural Network Model for in Situ Characterization of Material Deposition Quality in Additive Fabrication of Bone Scaffolds With Complex Microstructure | View |
| Submission | Indoor Daylight Analysis of Window Used in Historic Buildings | View |
| Submission | Streamwise Velocity Decomposition in Riblet Surfaces - Comparison Between Different Direct Numerical Simulation Domain Sizes | View |
| Submission | Study on Tensile Properties of Electro Spun Poly Ethylene Oxide Nanofibers Coupled With Titanium Di Oxide Nanoparticles | View |
| Submission | Thermal Properties of Carbon Nanotubes Reinforced Epoxy Matrix Composites by Molecular Dynamic Simulations | View |
| Submission | Prediction of Friction Coefficient of Forklifts by Genetic Algorithm and Long Short-Term Memory | View |
| Submission | Enhancing the Accuracy of Machinery Fault Diagnosis Through Fault Source Isolation of Complex Mixture of Industrial Sound Signals | View |
| Submission | Selective Floppy Mode Triggering in Kagome Chains | View |
| Submission | A Pilot Study on the Force and Torque Profiles During the Mechanical Fastening Process on Hybrid Aerospace Structure Joining | View |
| Submission | Multi-Class Defect Identification and Localization in Cfrp Composite Material Using Infrared Images and Mask Rcnn | View |
| Submission | Rapid Screening of New Dna Fluorogenic Aptamers With the Selex-Ngs Platform | View |
| Submission | Characterization of Wake Flow Dynamics and Energy Transport in Vortex-Induced Vibration Systems: A Low Reynolds Number Investigation | View |
| Submission | Quantifying the Mechanics of Nanofibrillated Cellulose Gels | View |
| Submission | Investigation of Fiber Optic Sensing of Strain and Temperature Fields in Hypersonic Structures | View |
| Submission | Last-Mile Delivery Optimization: A Case-Study Using Meituan Dataset | View |
| Submission | In-Situ Smelting of Discarded Urban Scrap Into Aluminum Alloys | View |
| Submission | Curriculum Integration Through Collaborative Teaching | View |
| Submission | Uncovering Electro-Mechano-Physiological Rules of Life: A New 2d/3d All-Optical Interrogation Technology | View |
| Submission | Leveraging Large Language Models and Knowledge Graphs for Enhanced Technical Document Classification | View |
| Submission | Retrograde Flow in Mouse Arteriovenous Fistula | View |
| Submission | Towards the Next Generation Portable Optical Device for Single Molecule Analysis | View |
| Submission | Performance Evaluation and Modeling of Hybrid Composite Laminates Under Low-Velocity Impact Loading: Enhancing Impact Resistance | View |
| Submission | Identifying the Impact of Metrological Parameters for Energy Demand Prediction in the Usa Using a Hybrid Svm-Pso Optimization Technique | View |
| Submission | Identification of Damage State in Carbon Fiber Reinforced Composites Using Transfer Learning | View |
| Submission | Direct Ink Write 3d Printing of Fully Dense and Functionally Graded Liquid Metal Elastomer Foams | View |
| Submission | Exploring Metal Additive Manufacturing in Martian Atmospheric Environments | View |
| Submission | Advanced Health Monitoring of Composite Structures Using Dense Spray-Coating Active Sensing Arrays | View |
| Submission | Ultrasonic Guided Wave-Based Damage Detection and Imaging for Composite Storage Tanks | View |
| Submission | Mechanics of Architected Materials Across Length and Time Scales | View |
| Submission | Structural Design of Helical Tube Steam Generator for Smr | View |
| Submission | Enhancing Aerodynamics of F1® in Schools Race Car Using Venturi Effect | View |
| Submission | Performance Enhancement of Thermoelectric Generators Integrated With Advanced Metamaterials Design for Waste Heat Recovery | View |
| Submission | Effects of the Cutting Process Parameters on the Quality of 5h Biaxial Woven Carbon-Fiber Dry Fabric Patterns | View |
| Submission | Experimental Characterization of High-Surface Area Thermal Energy Storage | View |
| Submission | Multi-Scale Modeling of Particle Size Distribution in Metal Additive Manufacturing - Effect on Structure and Porosity | View |
| Submission | Co-Production of High-Quality Hydrogen and Carbon Monoxide via Chemical Looping Dry Reforming of Methane | View |
| Submission | Heat Gain Through Window With a Shutter Used in Buildings | View |
| Submission | Neural Network Assisted Broadband Perfect Absorbing Meta-Layer Design for Wave and Vibration Attenuation | View |
| Submission | Impact of Infill Density and Raster Angle on 3d Printed Petg Mechanical Properties | View |
| Submission | The Moving Frame Paradigm in Rigid Body Dynamics Education | View |
| Submission | Using Topological Interlocked Tessellations to Enable Cooperative 3d Printing | View |
| Submission | Plasma Enhanced Seed Germination for Application in Space Agriculture | View |
| Submission | Characterizing Plasma-Activated Water Required for Effective Wound Healing Process | View |
| Submission | Water Droplet Evaporation in Air: Effects of Interfacial Thermal and Mass Diffusion Resistance | View |
| Submission | Solar-Thermal Photocatalytic Cylindrical Graphite for Thermal Interface Materials | View |
| Submission | Understanding the Joining Mechanisms of Grcop42 - Inconel 625 Fabricated via Laser Directed Energy Deposition | View |
| Submission | A Novel Design of a Heating and Thermal Storage System Using a Parabolic Mirror Solar Collector for the Sustainability of Human Exploration on the Lunar Surface | View |
| Submission | All-in-One Composite Integrating Optical and Thermal Regulation for All-Season Building Thermal Comfort | View |
| Submission | On the Dynamic Behavior of Mechanical Metamaterial With Tunable Frictional Energy Dissipation: Numerical and Experimental Study | View |
| Submission | Integrated Fem and Statistical Learning Approach for Characterizing the Effect of Process Parameters on Material Design | View |
| Submission | Investigation of Energy Exchange Between Coupled Mechanical-Electrical Conservative Oscillators | View |
| Submission | Plasma-Wound Interaction: Plasma Characterization to Validate Radicals and Identify Plasma Temperature Variations | View |
| Submission | Utilization of Ultrasound for Defect Detection of Additive Friction-Stir Deposition Repairs | View |
| Submission | Estimation of Ground Reaction Forces Using Kinematic Data and Opensim. | View |
| Submission | Enhancing Engineering Dynamics Education Through Dynamic Simulations: A Case Study Using Working Model 2-D | View |
| Submission | A 3d Phase-Field Approach to Simulate Brittle Fracture of Single Crystal Silicon | View |
| Submission | Sensitivity of Higher-Order Interatomic Force Constants and Thermal Conductivity to the Energy Surface Roughness of Exchange-Correlation Functionals | View |
| Submission | Quantifying How Additional Mass Added to Vibration Fatigue Testing Assembly Impacts Strain Response. | View |
| Submission | Modeling of Microplastic Removal From Municipal Wastewater With Ceramic Membranes | View |
| Submission | Molecular Dynamics (Md) Simulation of Silicon Nanoparticle Crystallization During Laser-Induced (Lift) Printing | View |
| Submission | Automated De Novo Design of Architectured Materials Based on Explanable Artificial Intellegence | View |
| Submission | A Thermal System to Assess Impact of Extreme Heat on Potato Canopies | View |
| Submission | On-Demand Rapid Fabrication of Components Using Forward Operating Base Aluminum Waste | View |
| Submission | The Need for Rapid and Accurate Performance Metrics for Vertical Building Integrated Photovoltaics | View |
| Submission | Efficient Hydrogen Production Through High Volatile Fatty Acids Yield | View |
| Submission | Machine Learning Approaches to Predict Surface Roughness in Inconel Samples Printed via Powder Bed Fusion Process | View |
| Submission | Comparative Experimental and Theoretical Study of Temperature Rise for Freestanding and Masonry Embedded Solar Cells | View |
| Submission | Structures for Controlling Liquid-Vapor Counterflow in Pool Boiling | View |
| Submission | A Meshfree Phase-Field Model for Simulating the Sintering Process of Metallic Particles for Printed Electronics | View |
| Submission | Dissecting Gait Deviations in Above-Knee Amputees: A Computational Framework for Prosthetic Design Optimization | View |
| Submission | Spray Atomization Characterization With the Aid of Machine Learning | View |
| Submission | A Cyber-Security Case Study: Balancing Openness and Protection for a Manufacturing Research Environment | View |
| Submission | Data Driven Sustainability in Powder Bed Fusion With Big Data Analysis of Environmental Impacts Indicators | View |
| Submission | Development and Optimization of Hybrid Heat Dissipation System for Lithium-Ion Battery Packs | View |
| Submission | Heat Transfer Enhancement in Solar Air Heaters Using Vortex Generators as Passive Flow Controls | View |
| Submission | Design, Fabrication and Characterization of Self-Switchable Thermochromic Coating for All-Day Thermophotonic Power Generation | View |
| Submission | Influence of Skew Angle on Ultrasonic Guided-Wave Beam Solutions in Anisotropic Composite Plates | View |
| Submission | Digital Twin Enabled Layout Optimization Framework for Photogrammetry Cameras in Reconfigurable Robotic Work Cells | View |
| Submission | A Machine Learning Approach to Sensitivity Analysis: Maize Stalk Flexure and Strength | View |
| Submission | Optimizing Hydroponic Systems: Integrating Water Flow, Root Growth, and Container Design for Efficient Plant Production – a Literature Review and New Hypothesis | View |
| Submission | A Regional Hydrogen Resiliency Concept | View |
| Submission | Coherent and Incoherent Phonon Heat Conduction in Silicon Porous Thin Film | View |
| Submission | Analysis of Real Fluid Thermodynamic Nonlinearities on Turbulent Mixing in Supercritical Fluids | View |
| Submission | In Situ Robotic Fabrication of Ligaments for the Rehabilitation of Prosthetic Finger Joints Utilizing a 6-Dof Platform | View |
| Submission | Inverse Prediction of Multimode Heat Transfer in a Fibrous Porous Substrate During Direct Solar Methane Pyrolysis | View |
| Submission | Viscoelastic and Tribological Responses of Ballistic Mechanical Metasurfaces | View |
| Submission | Research and Development of Surface-Bonded Pzt Installation Techniques | View |
| Submission | The Role of Sensor Technology and Social Knowledge in Transforming Cacao Fermentation: Case Study Hallbar Kakao 2.0 | View |
| Submission | Dexterous Soft Robotic Hand With Rich Sensing Feedback | View |
| Submission | Streamlining Muscle Force Estimation: Simplified Cost Functions Meet Advanced Muscle Models | View |
| Submission | Decentralized Near-Optimal Control of Multiple Drones Using Snac | View |
| Submission | Machine Learning (Ml) Approach to Predict the Viscosity of Ionic Liquids (Ils) Based Nanofluids | View |
| Submission | Moisture Actuated Tunable Phase Change Materials for All-Season Building Thermal Comfort Control | View |
| Submission | Development of Paste Extrusion Apparatus for Additive Manufacturing of Transverse Thermoelectric Structures | View |
| Submission | Development of a High-Fidelity Cad Model of the Female Foot Using Computed Tomography Data | View |
| Submission | Characterization of Carbon Fiber Reinforced Polyphenylene Sulfide (Cf/pps) Composites. | View |
| Submission | Metal Additive Manufacturing - Machine Learning Analysis and Inferences on the Process Parameters and Material Characteristic | View |
| Submission | Generation and Analysis of Electric Vehicle Synthetic Driving Data | View |
| Submission | Evaluation of Graphics Processing Units (Gpus) Performance of Ice-Sheet and Sea-Level System Model Flow Solver | View |
| Submission | Adhesion of Impure Ice on Surfaces | View |
| Submission | Waste Wood-Derived Composite for Energy-Efficient Thermal Management of Buildings Through Radiative Cooling and Thermal Energy Storage | View |
| Submission | A Transparent Phase Change Hydrogel Window for Energy Efficient Building Thermal Regulation | View |
| Submission | Enhancing Convective Heat Transfer on Graphene Nanochannels Using Functional Groups | View |
| Submission | Laser Vibrometry and Wavenumber Analysis Enabled Mechanical Properties Characterization for Additively Manufactured Thermoset Composites | View |
| Submission | Coupled Topology Optimization and Path Planning in Continuous Fiber Composites | View |
| Submission | Assessing Rail Damage in Turns Due to Lateral Load Transfer | View |
| Submission | Evaluation of Irregular Motion in Endovascular Treatment | View |
| Submission | Lh2 Tanks in Fire Incidents - the Cryogenic High Temperature Thermal Vacuum Chamber Enables In-Depth Insights | View |
| Submission | Disc Golf Materials Strength and Composition | View |
| Submission | Deep Learning Assisted Design Optimization of Porous Structure for Enhanced Multiphase Heat Transfer With Oscillating Flow | View |
| Submission | Thermal Management of Axial Flux Permanent Magnet Motors in Next-Generation Aircraft | View |
| Submission | Real-Time Online State of Health Assessment of Lithium-Ion Battery Using Physics-Informed Machine Learning Model for Resilient Infrastructure Applications | View |