Wednesday, November 1, 12:00 PM - 2:00 PM
Poster Session
Presentations
Note: Presentations may start a few minutes before the time listed in the schedule.
| Participant Role | Details | Action |
|---|---|---|
| Submission | Double Solar Screens Installed on Window With Different Opening Sizes | View |
| Submission | Designing a Mechanism of Lifting Suspension in Wheeled Armoured Vehicles | View |
| Submission | Investigation of the Mechanical Properties of Triply Periodic Minimal Surface Bone Scaffolds, Composed of Poly(lactic-Co-Glycolic Acid), Nanoclay, and Hydroxyapatite | View |
| Submission | A Comparative Study on Insulation Materials in Tanks for the Storage of Cryogenic Fluids in Fire Incidents | View |
| Submission | Online-Nde Technique for Industrial Fluid Measurements | View |
| Submission | Effectiveness of Short Lecture Videos During the Covid Pandemic and Beyond | View |
| Submission | On the Relationship Between the Vibration Characteristics of an Automobile Wheel and Generated Road Noise in the Vehicle Cabin and Resonance Noise | View |
| Submission | Water Vapor Based Artificial Muscles | View |
| Submission | Leveraging in Vitro Model Systems to Assess Uterine Mechanobiology During Pregnancy | View |
| Submission | Multibody Dynamics Analysis of Lightweight Manipulators for Automated Ropeway Structure Inspection | View |
| Submission | Designing a Protocol to Determine the Impacts of Fatigue on Suture Knots | View |
| Submission | To Study the Performance of Coated Carbide, Ceramics and Cermet Inserts During the Dry Turning of En-19 Hardened Steel | View |
| Submission | Accelerated Molecular Dynamics Simulation for Large Conformational Changes in Proteins | View |
| Submission | Wed-Machining With Molybdenum Wire of Inconel 718 Alloy Using Different Dielectric Fluids | View |
| Submission | Finite Element Analysis of 3D Printed Stand-Alone Transforaminal Lumbar Interbody Fusion Cages Under Various Loadings | View |
| Submission | Non Ice-Vehicles and Their Life Cycle: Value Analysis for Resource Investment and Integration of Circular Functionality for Battery 2nd Life Applications in Mobile Charging Infrastructure Setup for Remote Locations | View |
| Submission | On the Electromechanical Instability of Polar Elastomers | View |
| Submission | Higher Order Sensitivity Analysis for Elastic Problems Using the Multidual Finite Element Method | View |
| Submission | Interactive Visualization Tools for the Study of Spherical and Spatial Kinematics | View |
| Submission | Sustainability Design Analysis; Topology Optimization of Automated Rotary Dryer Component | View |
| Submission | Experiential Learning of Met Tower Instrumentation for Wind Energy Assessment | View |
| Submission | Synthesis and Characterization of Polylactic Acid Microspheres via Emulsion Based Processing | View |
| Submission | Analysis of Poultry Feed Mixing Machine Design; Management Approach | View |
| Submission | The Morphological, Mechanical, and Thermal Properties of Polypropylene Reinforced With Graphene Nanoparticles Extracted From Paper Cups | View |
| Submission | Squealer Tip Application and Aerodynamic Performance Prediction for Industrial Gas Turbine Axial Compressor | View |
| Submission | In-Situ Observation on Crystallization Behaviors of Blast Furnace Slag in Variable Cooling Conditions | View |
| Submission | Thermal Behavior of PCMs During Phase Transitions With Phase Change Hysteresis: Experimental Setup Development and Problems of Model Validation | View |
| Submission | Microwave Energy 3d Printing - Contactless Machining Process, Rapid Prototyping, Surface Finishing and Material Science Based on Machine Learning Algorithm Simulation Models | View |
| Submission | A Solution to an Inverse Heat Transfer Problem With Phase Change by Means of Meta-Heuristics and Artificial Neural Networks: A Comparative Study | View |
| Submission | Cfd Analysis of the Impacting Factors of Patients Varying Blood Conditions on the Artificial Heart’s Device Performance | View |
| Submission | Multiscale Operational Methodology: An Overview | View |
| Submission | A Novel Multi-Scale Model for the Effect of Hydrogen on the Mechanical Behavior of Crystalline Materials | View |
| Submission | Atomistic Simulation of Gan/diamond Interface Through Direct Bonding With Amorphous Interlayer and Novel Nanostructures | View |
| Submission | Mechanical Property Characterizations of Woven Natural Fiber-Reinforced Biopolymers 3d Printed Through a Laminated Object Manufacturing Process | View |
| Submission | Applying Heat Shrinking to Minimize Pillow Effect During Incremental Sheet Forming | View |
| Submission | In-Depth Spectroscopic Study of Hafnium Carbide for Extreme Environments | View |
| Submission | Heterogeneous Self-Healing Mechanisms of Metals at Nano-Scale | View |
| Submission | Assessing the High-Temperature Suitability of Sic Fiber-Reinforced Quaternary Ceramic Matrix Composites | View |
| Submission | Active Composites for Realizing Structural Self-Awareness | View |
| Submission | Observation of Localized Modes in the Continuum-Based Waveguides in Architected Elastic Plates | View |
| Submission | Photovoltaic Effect on Metal/insulator/semiconductor (Mis) Based Magnetic Tunnel Junction-Based Molecular Spintronics Devices | View |
| Submission | Analysis of Radiopaque Coatings of Pcl Flow Diverters for Brain Aneurysms | View |
| Submission | Influence of Geometry and Mass on the Heat Transfer Properties of a Casted Heat Sink | View |
| Submission | Computational and Experimental Characterization of Functionally Gradient Tissue Scaffolds for Complex Loading Conditions | View |
| Submission | A Non-Invasive, Label-Free Acoustic Microfluidics Separation Device: An Experimental Study | View |
| Submission | Convective Heat Transfer Enhancement of Tio2/water Nanofluid in Internal Tube Flows | View |
| Submission | Renewable Energy Driven Pure Oxygen-Based Membrane Aerated Biofilm Reactor for Wastewater Treatment | View |
| Submission | Influence of Long-Term Operation on Creep Deformation and Rupture Strength of mod.9cr-1mo Steel Welded Joint | View |
| Submission | Creep Void Nucleation and Growth Simulation Under Multiaxial Stress for Modified 9cr-1mo Forging Steel | View |
| Submission | Carbon Fiber-Reinforced Plastics Machining Using the Industrial Robots | View |
| Submission | Apex-Shifted Radon Transform-Based Direct Arrival Removal for Ultrasonic Array Measurements | View |
| Submission | Design of Fully Automatic Drum Filling Machine in Chemical Manufacturing Processes | View |
| Submission | Defect Imaging With Adjoint Tomography Theory Based Reverse-Time Migration Through Impedance Gradient | View |
| Submission | Thermofluid Sciences for Elementary School Students via Flow Visualization Using Smartphones and Tablets | View |
| Submission | Effect of Multiaxial Stress State on Creep Rupture Strength of Cc and Ds Ni-Based Superalloy Rene80 | View |
| Submission | Healthcare Leadership Leveraging the Benefits and Mitigating the Risks of Artificial Intelligence: A State-of-the-Art Review | View |
| Submission | A Comparative Study of Feature-Based and Image-Based Clustering Techniques for Laser Powder Bed Fusion Process Monitoring | View |
| Submission | A Deep Learning Based Approach to Improve Reconstruction of Time-Domain Full Waveform Inversion | View |
| Submission | Experimental Ultrasound Computed Tomography for Material Characterization Using a Linear Array Pair | View |
| Submission | A Novel Experimental Setup for Characterizing the Bearing Failure Strain of Advanced Composite Materials Using 3d-Digital Image Correlation | View |
| Submission | Vibration Analysis for Fault Detection in Fused Filament Fabrication Printing | View |
| Submission | A Novel Simulation Framework to Model Shot Peening Using a Multiscale Approach | View |
| Submission | Experimental and Numerical Study of Energy Absorbing Layer on the Jet Formation in Laser-Induced-Forward-Transfer (Lift) Printing | View |
| Submission | Experimental Assessment of Heat Transfer During Condensation of R32 Over Single Horizontal Plain, 2d and 3d Integral Finned Tubes | View |
| Submission | Thickness and Strain Dependent Cross-Plane Thermal Conductivity in Res2 With Stacking Order | View |
| Submission | Thermography With an Ultrasonic Transducer and Buffer Rod | View |
| Submission | Experimental Investigation of Process Induced Effects on Surface Roughness Characteristics of 3d Printed Parts in a Polyjet Am Setup | View |
| Submission | Batch Aerobic Digestion Bioprocessing Using Numerical Analysis and Simulation | View |
| Submission | Influence of Effective Length on the Directional Motion of Leidenfrost Droplets in Micro-Scale Ratchets | View |
| Submission | Analysis of Electrochemical Capture of Co2 From Oceanwater Coupled With Hydrates-Based Seabed Sequestration | View |
| Submission | Improving the Control of Fall Prevention Rehabilitation Device by Algorithmic Modification Through Testing | View |
| Submission | Experimental Investigation of Flow Boiling Heat Transfer Through Interconnected Microchannel Heat Sink | View |
| Submission | Investigating the Influence of Thermal Gradient on Mechanical Properties in Fdm 3d Printing | View |
| Submission | Design and Optimization of a Cost-Effective Bioreactor for Biogas Production With Feedback Control System | View |
| Submission | Caterpillar-Inspired Soft Crawling Robot Driven by Distributed Programmable Thermal Actuation | View |
| Submission | Multifunctional Sapphire Nanostructures Fabricated by Low Rf Power Icp-Rie | View |
| Submission | Synthesis and Characterization of Sic-Mullite Thermal Material | View |
| Submission | Optical Characterization and Modeling of Polycrystalline Moo3 Films Fabricated by Pulsed Laser Deposition | View |
| Submission | Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance | View |
| Submission | Self-Promoting Energy Storage in Balsa Wood-Converted Porous Carbon Coupled With Carbon Nanotubes | View |
| Submission | Investigation of Particle Aggregation Behavior in Anti-Dust Nanostructures | View |
| Submission | Evaluation Methodology for the Modern-Manufacturing Challenges of Multiple Needs: A Dynamic Multi-Scale Characterization Approach | View |
| Submission | Thermal Transport in Embedded Nanoparticle Composites: A Molecular Dynamics Study of the Optimal Size Distribution | View |
| Submission | Review of the Customized Test Methods for the Biological-Materials: Conformity With the Laboratory Essentials | View |
| Submission | Multi-Functional Load Resistant Framework for the Unpredictably Worthy Applications: Manufacturing With Controlled Discontinuity Degree | View |
| Submission | A Construct for the Inter-Scientific Application and the Bioengineering-Structures: A Facilitating Means to Explore | View |
| Submission | Monitoring of Schedule Sensitive Industrial, Expedition, and Exploratory Systems: Perceptive Analysis, Evaluation, and Validation | View |
| Submission | A Preventive Maintenance System for an Emerging Novel Industry: Requisites for an Effective Implementation | View |
| Submission | Evaluation Methodology for Novel, Biocompatible, Inhomogeneous, and Advanced Materials: A Contextual Fusion Approach | View |
| Submission | Lightweight Conductive Composite Network for Aircraft Lightning Strike Protection | View |
| Submission | On-Chip Measurement of Near Field Heat Transfer Between Sub-Wavelength Structures | View |
| Submission | Essential Processes That Elevate Humans Into Super-Humans With Conduct: Life Systems as the Means | View |
| Submission | Educational Methodology for the Purposeful Ideology of the Beneficiaries: The Means to Population Transformation | View |
| Submission | Thermal Transport in Gete Pcm Based Reconfigurable Devices | View |
| Submission | Femtosecond Laser Sintering of Ti Nanoparticles | View |
| Submission | Resource Conservation and Regenerative Process to Improve the Life: An Elementary Purification Purging Approach | View |
| Submission | Measures for Achieving Ecological Balance in the Challenging Conditions: An Approach of Resource Conservation | View |
| Submission | An Educational Approach That Is in Conformity With the Enrolled-Audience and Their Acquainted Thoughts | View |
| Submission | Minerals From Seawater– a Case of Blue Economy for the Gulf of Mexico | View |
| Submission | Multifaceted and Dynamic Forecast of the Consumer Specific Requirements: Foresight for the Market Intelligence | View |
| Submission | Structural Radiative Cooling in Highly Reflective White Snail Shells as Adaptation to Extreme Heat Environments | View |
| Submission | The Preliminary Functions of a Living Structure and Subsystem: Capabilities of the Multi-Functional Mechanics | View |
| Submission | Multiphase Modeling of Droplet-Based 3d Printing: Predicting Printability, Resolution, and Shape Fidelity in Additive Manufacturing Processes | View |
| Submission | Effect of Particle Size Distribution on Voids in Metal Additive Manufacturing | View |
| Submission | Rural Intervention for the Effective Revival of Socio-Economic Sufficiency: Awareness Specific Adaptability of Technology | View |
| Submission | Resource Specific Technology for Food Processing and Hospitality Industry: Geographic and Life Specific Technology | View |
| Submission | From Leafhopper to Camouflage and Display | View |
| Submission | Custom Design for Exploration, Spatial, Geographical, and Tropical Ambience: Resource Sensitive and Calculative Mechanization | View |
| Submission | Forethoughts Into the Minimum Disturbing Approach and the Tolerance: A Lead Towards the Super-Humans | View |
| Submission | Need Based Multi-Functional Yield for the Effectively Customized Situation: An Exploratory and Feasibility Requisite | View |
| Submission | Forethoughts Into the Aging Research That Imparts the Essentials: A Way to Healthy Transformation | View |
| Submission | Decisive Utilization of the Hr to Augment the Capabilities: Proposition for the Socio-Cultural Improvement | View |
| Submission | Material Methods for the Biologically and Environmentally Worthy Applications: Resource Management and Strategic Methods | View |
| Submission | Investigating the Influence of Nanoparticle Size and Loading on Printability of Polymer-Nanoparticle Composite Inks for Direct Ink Writing | View |
| Submission | Monolayer 2d Material-Polymer Nanohybrid Crystals | View |
| Submission | Computationally Efficient Property Calculation for Mixed Refrigerants Using Weighted Piecewise Polynomial Regression | View |
| Submission | Anti-Corrosion Application of Graphene on Copper Electrodes in an Electrolyzer | View |
| Submission | Salt-Assisted Assembly of Mxene on Arbitrary Polymers | View |
| Submission | Experimental Investigation of the Nano-Fin Effect (Nfe) During Thin Film Evaporation From Nanopores Using Temperature Nano-Sensors | View |
| Submission | Active Learning in an Online Environment | View |
| Submission | Thermal Transport Properties of Bilayer Graphene With Different Twist Angles | View |
| Submission | Non-Linear Behavior of Raman Linewidth of Wse2 | View |
| Submission | A Precise Method to Characterize Thermal Transport Properties of Two-Dimensional Ferromagnetic Materials | View |
| Submission | A Novel Fabrication Method to Manufacture Two-Dimensional Flexible Devices | View |